JVC MA372IEN CD Player User Manual


 
ENGLISH
15
Indications Item
( : Initial)
Selectable settings, [reference page]
AUX ADJ
Auxiliary input level
adjustment
A.ADJ 00
— A.ADJ 05
: Adjust the auxiliary input level to avoid the sudden increase of the
output level when changing the source from external component
connected to the AUX input jack on the control panel.
TAG DISP
Tag display
TAG ON
TAG OFF
: Shows the Tag information while playing MP3/WMA tracks, [11].
: Cancels.
AMP GAIN
Amplifier gain control
LOW PWR
HIGH PWR
: VOL 00 – VOL 30 (Select this if the maximum power of the speaker is
less than 50 W to avoid them from damaging the speaker.)
: VOL 00 – VOL 50
IF BAND
Intermediate
frequency band
AUTO
WIDE
: Increases the tuner selectivity to reduce interference noise between
close stations. (The stereo effect may be lost.)
: Subject to the interference noise from adjacent stations, but the
sound quality will not be degraded and the stereo effect will remain.
Other external component operations
You can connect an external component to the AUX
(auxiliary) input jack on the control panel.
~
Ÿ
Turn on the connected component and
start playing the source.
Portable audio player, etc.
Stereo mini plug
(not supplied)
! Adjust the volume.
Adjust the sound as you want.
(See page 12.)
To check the clock time while listening to an
external component
AUX IN Ô Clock
EN14-21_KD-G343_003A_f.indd 15EN14-21_KD-G343_003A_f.indd 15 9/4/07 3:55:42 PM9/4/07 3:55:42 PM