JVC LVT1437-001A Stereo Receiver User Manual


 
14
Y
PB
PR
COMPONENT VIDEO
MONITOR OUTDVR/DVD INVIDEO(VCR) IN
Î
VIDEO IN
VIDEO
S-VIDEO
VIDEO
VIDEO IN
DVR/DVD IN
FRONT
L
R
AUDIO
Ç
ıÅ
VIDEO(VCR) IN
HDMI
Do not connect the AC power plug to the wall outlet until all connections are completed.
7 Connecting another video component to the VIDEO IN jacks:
Turn off all components before making
connections.
Stereo audio cable
(not supplied)
White
Component video cable (not supplied)
Composite video cable (not supplied)
S-video cable (not supplied)
Red
Green
Blue
Red
Å To HDMI output
ı To component video output
Connect Y, P
B, and PR correctly.
Ç To left/right audio channel output
Î To composite video output
To S-video output
NOTES
When playing back audio and video with the HDMI connection, the HDMI lamp on the front panel lights up.
Select the audio and video input setting according to the connection method. See page 20 for details.
Set the audio input setting to “HDMI” when you enjoy sound with the HDMI connection. See “Selecting the audio input setting” on page
20.
In addition to using the HDMI cable, you can enjoy digital sound as well using a digital audio cable (coaxial or optical). When shipped
from the factory, the digital optical terminal (DIGITAL IN 2 (VIDEO)) on the rear of the receiver is set for a video component other than
DVD recorder and DVD player. For details of digital audio connection, see page 16.
When connecting another video component with a HDMI cable or component video cable, set “HDMI SELECT” or “CMPNT SELECT”
to “VIDEO.” (See page 32.)
HDMI cable (not supplied)
DBS tuner, etc.
: signal current
Available video input setting for each video output setting:
: Available –: Not available
HDMI CMPNT S C RGB
HDMI
CMPNT
S––
RGB/C
VIDEO INPUT
VIDEO
OUTPUT
Select the appropriate VIDEO INPUT (see page 20) according to the
connection you have made. If you do not, you cannot view the playback
picture on the TV.
09-15RX-D701S[B]_f.p65 05.11.9, 11:32 AM14