Filter
Top Products
G-2
Caution: Proper Ventilation
To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows:
1. Front: No obstructions and open spacing.
2. Sides/ Top/ Back: No obstructions should be placed in the areas shown by the dimensions below.
3. Bottom: Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height of 10 cm
or more.
About the cooling fan
A cooling fan is mounted on the rear panel of the unit to prevent abnormal temperature inside the unit, thus assuring normal
operation of the unit. The cooling fan automatically starts rotating to intake external cool air when the volume is increased up
to more than a certain level.
10 cm
15 cm
1 cm
15 cm
15 cm
1 cm
15 cm
15 cm
Front Side
SP-UXS59
CA-UXS59
SP-UXS59
CA-UXS59
Safety[B]_UX-S59.fm Page 2 Tuesday, March 8, 2005 4:01 PM