JVC LVT1220-002A Stereo System User Manual


 
72
English Convenient Functions English
Auto Standby
If no sound is produced for 3 minutes when a
sound source other than the FM/AM radio is
selected, the main unit automatically turns off.
When a sound source other than the FM/
AM radio is selected
Press .
While a disc, MD, or cassette tape is being
played back or recorded:
When playback or recording finishes, auto standby
starts the countdown (the "A. STANDBY" indicator
flashes). When no operation is carried out within 3
minutes, the main unit automatically turns off.
When you start playback or recording within 3 min-
utes, auto standby starts the countdown again
after playback or recording finishes.
When an operation other than playback and record-
ing finishes and no operation is carried out within 3
minutes, the main unit automatically turns off.
While you are listening to sound from other
equipment:
When no sound is produced, auto standby starts
the countdown (the "A. STANDBY" indicator
flashes). When no operation is carried out within 3
minutes, the main unit automatically turns off.
"A. STANDBY OFF" indicator starts to flash 20
seconds before the main unit is to turn off.
Press once again.
NOTE
Leaving the volume at "0" is not the same as produc-
ing no sound, and therefore does not start the auto
standby function.
Disc/MD Ejection Lock
You can prohibit ejection of a disc and MD.
When the main unit is turned off
While holding down , press on
the main unit.
Even if you press or , "LOCKED" appears in
the display window and the disc or MD does not
come out.
In addition, when you press or , while the
main unit is turned off, "LOCKED" appears in the
display window and the main unit does not turn on.
When the main unit is turned off
Carry out the operation explained above once
again.
"A. STANDBY" stands for "Auto Standby".
Auto standby indicator
Auto standby performance
Canceling auto standby
Canceling the disc/MD ejection lock
UX-QD7[UB].book 72 ページ 2004年9月3日 金曜日 午後2時43分