JVC LVT1007-010A[A] Stereo Receiver User Manual


 
43
CD changer
After pressing CD DISC, you can perform the following operations
on a CD changer:
3: Start playing.
4: Return to the beginning of the current (or previous)
track.
¢: Skip to the beginning of the next track.
7: Stop playing or recording.
8: Pause playing. To resume, press 3.
1 6, 7/P: Select the number of a disc installed in a CD
changer.
After pressing CD, you can perform the following operations on a
CD changer:
1 10/0, +10:Select a track number directly.
For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10/0.
For track number 30, press +10, +10, then 10/0.
Example:
Selecting disc number 4, track number 12, and starting playback.
1. Press CD DISC, then press 4.
2. Press CD, then press +10, 2.
If your CD changer is of 200-disc loading capability (except for
XL-MC100 and XL-MC301),
you can do the following operations using the 10 keys after pressing
CD.
1. Select a disc number.
2. Then select a track number (always enter two digits).
3. Start playback.
Examples:
Selecting disc number 3, track number 2, and starting playback.
Press 3, then, 0, 2, then 3.
Selecting disc number 10, track number 5, and starting playback.
Press 1, 0, then, 0, 5, then 3.
Selecting disc number 105, track number 12, and starting
playback. Press 1, 0, 5, then 1, 2, then 3.
CD recorder
After pressing TAPE/CDR (or TAPE/CDR CONTROL), you can
perform the following operations on a CD recorder:
3: Start playing.
4: Return to the beginning of the current (or previous)
track.
¢: Skip to the beginning of the next track.
7: Stop playing or recording.
8: Pause playing. To resume, press 3 .
1 10/0, +10: Select a track number directly.
For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10/0.
For track number 30, press +10, +10, then 10/0.
REC PAUSE: Enter recording pause by pressing this button.
To start recording again, press this button then 3.
Cassette deck
After pressing TAPE/CDR (or TAPE/CDR CONTROL), you can
perform the following operations on a cassette deck:
3: Start playing.
REW: Fast wind the tape from right to left.
FF: Fast wind the tape from left to right.
7: Stop playing or recording.
8: Pause playing. To resume, press 3 .
REC PAUSE: Enter recording pause by pressing this button.
To start recording again, press this button then 3.
Note:
You can use either the TAPE/CDR or the TAPE/CDR CONTROL
button to activate the buttons for the target source. If you press the
TAPE/CDR button, the playing source also changes. On the other
hand, pressing the TAPE/CDR CONTROL button does not change the
playing source.
40-50_7032[A]3.pm6 03.5.12, 7:02 PM43