ENGLISH
21
∞
SPECTRUM ANALYZER
SA
Selecting spectrum analyzer patterns
You can select any one from 8 different spectrum analyzer patterns or a demonstration of all
the mode.
1
Select the spectrum analyzer pattern you
want.
Each time you press the button, the pattern changes as
follows:
1. ALL DEMO (default setting)
Demonstrate all the spectrum analyzer patterns (2 to 9), each
for 10 seconds.
2. PEAK HOLD 1
Hold the peak for about 2 seconds, dipslayed from the top.
3. STANDARD 1
Standard spectrum analyser, displayed from the top.
4. PEAK HOLD 2
Same as PEAK HOLD 1, but displayed from the bottom.
5. STANDARD 2
Same as STANDARD 1, but displayed from the bottom.
6. PEAK
Display only the peak and the two segments below it from the
top.
7. TALKING MOUTH
Display the upper and lower peaks together.
8. MIRROR
Symetrical display.
9. SIDE WINDER
Spectrum analyser displayed horizontally. In this case the
frequency indications at the bottom of the display disappear.
10. OFF
No pattern displayed
1
EN21-22.KW-XC550[J]/f 98.12.22, 4:40 PM21