JVC KW-XC410 CD Player User Manual


 
6
ENGLISH
Remote controller — RM-RK50
Main elements and features
1 (standby/on/attenuator) button
Turns the power on if pressed briefly or
attenuates the sound when the power is on.
• Turns the power off if pressed and held.
2 5 U (up) / D (down) buttons
Changes the FM/AM bands with 5 U only.
Changes the preset stations with D only.
Changes the folder of the MP3/WMA
discs.
Changes the tape directions with 5 U only.
While playing an MP3 disc on an
MP3-compatible CD changer:
Changes the disc if pressed briefly.
Changes the folder if pressed and held.
3 VOL / VOL + buttons
Adjusts the volume level.
4 SOUND button
Selects the sound mode (EQ: equalizer).
5 SOURCE button
Selects the source.
6 2 R (reverse) / F (forward) 3 buttons
Searches for stations if pressed briefly.
Fast-forwards or reverses the track if
pressed and held.
Changes the tracks of the disc if pressed
briefly.
Fast-forwards or reverses the tape if
pressed and held.*
Finds the beginning of a tune (MMS)
while listening to a tape if pressed
briefly.*
* To release these operations, press 5 U.
Playback resumes.
Installing the lithium coin battery
(CR2025)
• When operating, aim the remote controller
directly at the remote sensor on the unit.
Make sure there is no obstacle in between.
Warning:
Do not install any battery other than
CR2025 or its equivalent; otherwise, it
may explode.
Store the battery in a place where children
cannot reach to avoid risk of accident.
To prevent the battery from over-heating,
cracking, or starting a fire:
Do not recharge, short, disassemble,
heat the battery, or dispose of it in a fire.
Do not leave the battery with other
metallic materials.
Do not poke the battery with tweezers or
similar tools.
Wrap the battery with tape and insulate
when throwing away or saving it.
Caution:
EN06-13_KW-XC407[EE]f.indd 6EN06-13_KW-XC407[EE]f.indd 6 10/5/05 3:35:47 PM10/5/05 3:35:47 PM