JVC KW-XC410 CD Player User Manual


 
22
ENGLISH
Indications Selectable settings, [reference page]
EXT INPUT*
1
External input
CHANGER : [Initial]; To use a JVC CD changer, [13], an Apple iPod
or a JVC D. player, [23], a JVC compatible satellite
(SIRIUS/XM) tuner, [24].
EXT INPUT : To use another external component, [23].
AUX ADJUST
Auxiliary input
level adjustment
AUX ADJ 00 – AUX ADJ 05: Adjust the auxiliary input level
accordingly, to avoid the sudden increase of the output
level when changing the source from external component
connected to the AUX input jack on the control panel.
[Initial: AUX ADJ 00]
TAG DISP
Tag display
TAG ON : [Initial]; Shows the ID3 tag while playing MP3/WMA
tracks, [15].
TAG OFF : Cancels.
AMP GAIN
Amplifier gain
control
You can change the maximum volume level of this unit.
LOW PWR : VOLUME 00 – VOLUME 30 (Select this if the
maximum power of the speaker is less than 50 W to avoid
damaging the speaker.)
HIGH PWR : [Initial]; VOLUME 00 – VOLUME 50
IF FILTER
IF filter
AUTO : [Initial]; Increases the tuner selectivity to reduce
interference noises between close stations. (Stereo effect
may be lost.)
WIDE : Subject to the interference noises from adjacent stations,
but sound quality will not be degraded and maintains the
stereo effect.
AREA
Tuner channel
interval
AREA US : [Initial]; Select this when using the unit in North or
South America except for Middle South America.
(FM: 200 kHz; AM: 10 kHz)
AREA EU : Select this when using the unit in any other area than
North, Middle South, and South America. (FM: 50 kHz
manual tuning, 100 kHzauto search; AM: 9 kHz)
AREA SA : Select this when using the unit in Middle South America.
(FM: 100 kHz; AM: 10 kHz)
*
1
Cannot be selected if the source is “CD-CH” or “EXT.”
EN18-27_KW-XC400[J]2.indd 22EN18-27_KW-XC400[J]2.indd 22 10/18/05 10:19:05 AM10/18/05 10:19:05 AM