Filter
Top Products
6
Setting the clock
1
2 Setting the hour and minute.
To adjust the
hour
To adjust the
minute
To use these buttons for their original
functions again, wait for 15 seconds without
pressing any of these buttons or press CLOCK
again.
To check the current clock time while
listening to a source
Radio operations
~
or
Ÿ Start searching for a station.
Lights up when receiving an FM stereo broadcast with
sufficient signal strength.
Selected band appears.
When a station is received, searching
stops.
To stop searching, press the same button
again.
To tune in to a station manually
In step Ÿ ...
1
2 Select a desired station frequency.
When an FM stereo broadcast is hard to
receive
Reception improves, but stereo effect will be
lost.
To restore the stereo effect, repeat the same
procedure. “MONO OFF” appears and the MO
indicator goes off.
Storing stations in memory
You can preset six stations for each band.
FM station automatic presetting —
SSM (Strong-station Sequential
Memory)
1 Select the FM band (FM1 – FM3) you
want to store into.
Lights up when monaural mode is activated.
Current display Ô
Clock
EN02-07_KW-S601_f.indd 6EN02-07_KW-S601_f.indd 6 5/10/06 11:14:25 AM5/10/06 11:14:25 AM