Filter
Top Products
14
ENGLISH
Other convenient RDS functions
and adjustments
Automatic selection of the station
when using the number buttons
Usually when you press the number button, the
preset station is tuned in.
However, when the preset station is an RDS station,
something different will happen. If the signals from
that preset station are not sufficient for good
reception, this unit, using the AF data, tunes in to
another frequency broadcasting the same
programme as the original preset station is
broadcasting. (Programme search)
• The unit takes some time to tune in to another
station using Programme search.
To activate programme search, follow the procedure
below.
• See also “Changing the general settings (PSM)”
on page 24.
1 Press and hold SEL (select) for more than 2
seconds so that one of the PSM items appears
on the display.
2 Press ¢ or 4 to select
“P(Programme)-SEARCH.”
3 Press + to select “ON.”
Now programme search is activated.
4 Press SEL (select) to finish the setting.
To cancel programme search, repeat the
same procedure and select “OFF” in step 3 by
pressing –.
To search your favorite programme type
1
Press and hold TP/PTY for more than
2 seconds while listening to an FM
station.
2
Select one of the PTY codes.
3
Press ¢ or 4 to start PTY
search for your favourite programme.
TP/PTY
The last selected PTY code appears.
Ex.: When “ROCK M” is selected
8 9 10 11 127
RNDRPTMO
• If there is a station broadcasting a programme of
the same PTY code as you selected, that station
is tuned in.
• If there is no station broadcasting a programme
of the same PTY code as you selected, the
station will not change.
Note:
In some areas, the PTY search will not work correctly.
OR
EN10_16KSFX772R_FX732R[E]f.pm5 12/14/01, 7:55 PM14