Filter
Top Products
16
TAPE OPERATIONS
Listening to a tape
Note on One-Touch Operation:
When a cassette is already in the cassette compartment, pressing TAPE/PROG turns on the
unit and starts tape play automatically.
21
PROG
TAPE
1
Insert a cassette.
The unit turns on and tape play starts automatically.
When one side of the tape reaches its end during play, the
other side of the tape automatically starts playing. (Auto
Reverse)
2
Select the tape direction.
Each time you press the button, the tape direction changes
alternatively – forward (
) and reverse ( ).
DOLBY NR BUTTON (only for KS-FX730R)
Press the MO/RND/ button to set the Dolby B NR system as required in step 2 above.
• Dolby Noise reduction manufactured under license from Dolby Laboratories Licensing
Corporation. “DOLBY” and the double-D symbol
are trademarks of Dolby Laboratories
Licensing Corporation.
To stop play and eject the cassette
Press 0.
Tape play stops and the cassette automatically ejects from the cassette compartment.
If you change the source to AM/FM (or CD changer for KS-FX730R/FX630R only), the tape
play also stops (without ejecting the cassette this time).
• You can also eject the tape with the unit turned off.
Prohibiting tape ejection
You can prohibit the tape ejection and can “lock” a tape in the cassette compartment.
Press and hold TAPE and 0 for more than 2 seconds. “EJECT” flashes on the display for
about 5 seconds, and the tape is “locked.”
To cancel the prohibition and “unlock” the tape, press and hold TAPE and 0 for more
than 2 seconds again. “EJECT” flashes again for about 5 seconds, and this time the tape is “unlock.”