Filter
Top Products
10
Setting and operating PTY standby mode
PTY
TP /RDS
• When the TP button is pressed briefly in the FM mode, the “TP” indicator is
lit during reception of a TP station and the TA standby mode is engaged.
Note:
When the station being received is not a TP station, the TP indicator flashes. Press
the ¢
or 4 button to engage the TA standby mode. “SEARCH” appears
in the display, and TP station search starts. When a TP station is tuned in, “TP” is
lit.
• If you’re listening to a TAPE (or CD, KS-FX730R/FX630R only) and wish
to hear a TA broadcast, press the TP button to enter the TA standby mode.
(The “TP” indicator lights up.)
If a TA programme starts broadcasting while the TA standby mode is active,
“TRAFFIC” is displayed and the FM mode is engaged. The volume increases
to the preset "TA VOL" level and the TA programme can be heard (see page
14).
Note:
To deactivate the TA standby mode, press the TP button again.
TP (Traffic Programme) button
Setting and operating TA (Traffic Announcement) standby mode
• When the PTY button is briefly pressed in the FM mode,
the “PTY” indicator is lit during reception of a PTY station and the PTY
standby mode is engaged. The PTY name stored on page 9 (for example:
“CLASSICS” ) flashes for 5 seconds.
Note:
When the station being received is not a PTY station, the "PTY" indicator flashes.
Press the ¢
or 4 button to engage the PTY standby mode. “SEARCH”
appears in the display, and PTY station search starts. When a PTY station is tuned
in, “PTY” is lit.
• If you are listening to a TAPE (or CD, KS-FX730R/FX630R only) and wish
to hear a selected PTY broadcast, press the PTY button to enter the PTY
standby mode. (The “PTY” indicator lights up.)
If the PTY starts broadcasting while the PTY standby mode is active, the
selected PTY name is displayed and the FM mode is engaged. The se-
lected PTY can then be heard.
Note:
To deactivate the PTY standby mode, press the PTY button again.