JVC KS-FX43R CD Player User Manual


 
5
ENGLISH
BASIC OPERATIONS
Turning on the power
1
Turn on the power.
Notes on One-Touch Operation:
When you select a source in step
2
below, the
power automatically comes on. You do not
have to press this button to turn on the power.
If the cassette is already in the cassette
compartment, tape play starts automatically.
However, it is not recommended to leave the
cassette in the compartment when turning off
the power or ignition key. It may damage the
tape head and the cassette.
2
Select the source.
To operate the tuner (FM or AM),
see pages 7 – 17.
To operate the tape,
see page 18.
Only for KS-FX43R/KS-FX483R/KS-FX480R:
To operate the CD changer,
see pages 24 – 25.
3
Adjust the volume.
4
Adjust the sound as you want.
(See pages 19 – 20.)
To drop the volume in a moment
Press briefly while listening to any
source. ATT starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the
button briefly again.
To turn off the power
Press and hold for more than one
second.
SEE YOU appears, then the unit turns off.
Only for KS-FX43R
KS-FX43R is equipped with the steering
wheel remote control function.
If your car is equipped with the steering wheel
remote controller, you can operate this
receiver using the controller.
See the Installation/Connection Manual
(separate volume) for connection to utilize
this function.
Volume level appears.
To decrease the volume
To increase the volume
2
3
1
KS-FX43R/KS-FX483R/KS-FX480R
KS-F383R/KS-F380R
KS-FX43R/
KS-FX483R/KS-FX480R
KS-F383R/KS-F380R
2
CD-
CH
AM
FM
AM
FM
EN05-06_KS-FX483R[E_EX]f.p65 12/4/02, 11:19 AM5