Filter
Top Products
20
ENGLISH
Storing your own sound
adjustments
You can adjust the sound modes (BEAT, SOFT,
POP) to your preference and store your own
adjustments in memory.
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step
1
again.
1
Call up the sound mode you want to
adjust.
• See the left column for details.
2
Make adjustments.
• For details, see “Adjusting the sound” on
page 19.
3
Repeat step
2
to adjust the other
items.
4
Press and hold SCM until the sound
mode you have selected in step
1
flashes on the display.
Your adjustment made for the
selected sound mode is stored in
memory.
5
Repeat the same procedure to store
other sound modes.
To reset each sound mode to the factory
settings, repeat the same procedure and
reassign the preset values listed in the table on
the left column.
Selecting preset sound modes
You can select a preset sound adjustment
suitable to the music genre.
Select the sound mode you want.
Each time you press the button,
the sound mode changes as
follows:
Indication For: Preset values
BAS TRE LOUD
SCM OFF (Flat sound) 00 00 OFF
BEAT Rock or disco +02 00 ON
music
SOFT Quiet +01 –03 OFF
background
music
POP Light music +04 +01 OFF
Notes:
• You can adjust each sound mode to your preference,
and store it in memory.
If you want to adjust and store your original sound
mode, see “Storing your own sound adjustments”
that follows.
• To adjust the bass and treble reinforcement levels or
to turn on/off the loudness function, see page 19.
(BEAT)
SCM OFF
(SOFT) (POP)
SCM
SCM
SCM
EN19-20_KS-FX483R[E_EX]f.p65 12/4/02, 11:20 AM20