Filter
Top Products
ENGLISH
19
Changing the AM/FM channel intervals
When this unit is shipped from the factory, the channel intervals are set to 10 kHz for AM and
200 kHz for FM (AREA US settings).
You will have to change the channel intervals when using this unit in an area other than North
America and South America.
• AREA EU: Select this when using this unit in an area other than North and South America.
(9 kHz for AM and 50 kHz (for manual tuning) / 100 kHz (for searching) for FM)
• AREA US: Select this when using this unit in North or South America. (10 kHz for AM and
200 kHz for FM)
1 Press SEL for more than 2 seconds.
One of the PSM items appears on the display.
2 If “AREA” does not appear, press SSM ¢
or SSM 4
until it appears.
3 Rotate the control dial clockwise or counterclockwise to select the correct channel intervals.
Turning on or off the key-touch tone
You can deactivate the key-touch tone if you do not want to make it beep when pressing a
button. (When shipped from the factory, the key-touch tone is activated.)
• ON: The key-touch tone is activated.
• OFF: The key-touch tone is deactivated.
1 Press SEL for more than 2 seconds.
One of the PSM items appears on the display.
2 If “BEEP” does not appear, press SSM ¢
or SSM 4
until it appears.
3 Rotate the control dial clockwise or counterclockwise to turn on or off the key-touch tone.
Current setting appears.
Current setting appears.
17-22.KD-SX939/SX930 98.2.25, 10:34 AM19