Filter
Top Products
ENGLISH
17
OTHER MAIN FUNCTIONS
Changing general settings (PSM)
You can change the following settings for this unit by using the PSM (Preferred Setting Mode)
control.
• CLOCK H and CLOCK M: Adjusts the built-in clock (see below).
• LEVEL: Changes the level indicator mode on the display (see page 18).
• DIMMER: Selects the dimmer mode (see page 18).
• AREA: Changes the FM/AM channel interval (see page 19).
• BEEP: Turning on/off the key-touch tone (see page 19).
Setting the clock
After installation, set the built-in clock correctly.
1 Press SEL (Select) for more than 2 seconds.
One of the PSM items appears on the display.
2 If “CLOCK H” does not appear, press SSM ¢
or SSM 4
until it appears.
3 Rotate the control dial to adjust the hour.
4 Press SSM ¢
or SSM 4
until “CLOCK M” appears.
5 Rotate the control dial to adjust the minute.
6 Press DISP to start clock.
3, 5
16
2, 4
Current setting appears.
17-22.KD-SX939/SX930 98.2.25, 10:32 AM17