JVC KD-SX858R CD Player User Manual


 
36
Causes
CD is inserted upside down.
You are driving on rough roads.
The disc is scratched.
Connections are incorrect.
The volume is turned to the
minimum level.
Connections are incorrect.
Signals are too weak.
The antenna is not connected
firmly.
No CD is in the loading slot (or
in the magazine).
The CD is inserted incorrectly.
This unit is not connected to a
CD changer correctly.
The unit may function
incorrectly.
The built-in microcomputer may
function incorrectly due to noise,
etc.
What appears to be trouble is not always serious. Check the following points before calling a
service center.
TROUBLESHOOTING
Remedies
Insert the CD correctly.
Stop playing CD while driving on
rough roads.
Change the disc.
Check the cords and
connections.
Adjust it to the optimum level.
Check the cords and
connections.
Store stations manually.
Connect the antenna firmly.
Insert a CD.
Insert it correctly.
Connect this unit and the CD
changer correctly and press the
reset button of the CD changer.
Press the reset button of the CD
changer.
Press and 0 at the
same time for more than 2
seconds. Be careful not to drop
CD when it is ejected.
Press and SEL at the
same time for more than 2
seconds to reset the unit. (The
clock setting and preset stations
stored in memory are erased.)
Symptoms
CD cannot be played back.
CD sound is sometimes
interrupted.
Sound cannot be heard from
the speakers.
SSM (Strong-station
Sequential Memory)
automatic preset does not
work.
Static noise while listening to
the radio.
“NO CD” or “NO DISC”
appears on the display.
“RESET 8” appears on the
display.
“RESET 1-RESET 7” appears
on the display.
CD can be neither played
back nor ejected.
The unit does not work at all.
EN35-37.KD-SX858R/S757R[E]/1 98.10.13, 4:04 PM36