JVC KD-SX858R CD Player User Manual


 
29
ENGLISH
Selecting the level display
You can select the level display according to your preference. When shipped from the factory,
the level indicator on the display shows the audio level setting.
AUDIO: Audio level indicator
OFF: Volume level indicator
1. Press and hold SEL (Select) for more than 2 seconds to call up the general settings mode.
2. Select “LEVEL” with
¢ or 4 .
3. Select “AUDIO” or “OFF” with the control dial.
The level display setting changes as follows:
Selecting the display mode while using the CD changer
(ONLY FOR KD-SX858R)
You can change the initial indication on the display either to disc number or to elapsed playing
time, while using the CD changer.
1. Press and hold SEL (Select) for more than 2 seconds to call up the general settings mode.
2. Select “CH DISP” with
¢ or 4 .
3. Select “DISC” or “TIME” with the contorl dial.
Selecting the telephone muting (ONLY FOR KD-SX858R)
This mode is used when a cellular phone system is connected. Depending on the phone
system used, select either “MUTING 1” or “MUTING 2”, whichever mutes the sounds from
this unit.
When shipped from the factory, this mode is deactivated.
MUTING 1: Select this if this setting can mute the sounds.
MUTING 2: Select this if this setting can mute the sounds.
OFF: Cancels the telephone muting.
1. Press and hold SEL (Select) for more than 2 seconds to call up the general settings mode.
2. Select “TEL” with
¢ or 4 .
3. Select “MUTING 1,” “MUTING 2” or “OFF” with the control dial.
The telephone muting mode changes as follows:
AUDIO
OFF
DISC
TIME
MUTING 1 MUTING 2
OFF
EN25-30.KD-SX858R/S757R[E]/1 98.10.9, 6:05 PM29