Filter
Top Products
33
ENGLISH
Adjusting the contrast level
You can adjust the display contrast level (among 1 to 10). When shipped from the factory, the
display contrast level is at level 5.
1. Press and hold SEL (Select) for more than 2 seconds so that “PSM” appears on the lower
part of the display.
2. Select “CONTRAST” with ¢ or 4 .
3. Select the desired mode with the control dial.
Selecting the scroll mode
You can select the scroll mode for the name display and disc information if it consists of more
than 12 characters. When shipped from the factory, Auto Scroll mode is set to “ONCE.”
• AUTO: Repeats the scroll (5-second intervals in between)
• ONCE: Scrolls only once
• OFF: Cancels Auto Scroll
1. Press and hold SEL (Select) for more than 2 seconds so that “PSM” appears on the lower
part of the display.
2. Select “SCROLL MODE” with ¢ or 4 .
3. Select the desired mode with the control dial.
The scroll mode changes as follows:
Note:
Even if the scroll mode is set to “OFF,” you can scroll the display by pressing DISP for more than 1
second while changing display mode.
Changing the AM/FM channel intervals
When this unit is shipped from the factory, the channel intervals are set to 10 kHz for AM and
200 kHz for FM (AREA US settings).
You will have to change the channel intervals when using this unit in an area other than North
America and South America.
• AREA EU: Select this when using this unit in an area other than North and South America.
(9 kHz for AM and 50 kHz (for manual tuning) / 100 kHz (for searching) for FM)
• AREA US: Select this when using this unit in North or South America. (10 kHz for AM and
200 kHz for FM)
1. Press and hold SEL (Select) for more than 2 seconds so that “PSM” appears on the lower
part of the display.
2. Select “AREA CHANGE” with ¢ or 4 .
3. Select the correct channel intervals with the control dial.
The channel intervals alternate between EU settings and US settings.
AUTO ONCE
OFF
EU
US
EN26-33.KD-SX1000R[J]/1 98.6.8, 3:54 PM33