Filter
Top Products
21
ENGLISH
To cancel Advanced SCM – SCM LINK
You can cancel the Advanced SCM (Sound Control
Memory), and unlink the sound modes and the
playback sources.
When shipped from the factory, a different sound
mode can be stored in memory for each source so
that you can change the sound modes simply by
changing the sources.
• LINK ON: Advanced SCM (different sound
modes for different sources)
• LINK OFF: Conventional SCM (one sound
mode for all sources)
To set the clock display – CLOCK
You can set the clock to be shown on the display
when the unit is turned on. When shipped from the
factory, the clock is set to be shown on the display.
• ON: Clock display is turned on.
• OFF: Clock display is turned off. When
“OFF” is selected, the current source
name or station band appears
instead of the clock
display.
To check the other information during play
Press DISP (display). Each time you press the button,
the other information (either the clock or the source
name) will be shown on the lower part of the display
for a while.
To select the level meter – LEVEL
You can select the level display according to your
preference. When shipped from the factory,
“AUDIO 2” is selected.
• AUDIO 1:
Shows the audio level indicator and
the equalization pattern indicator.
• AUDIO 2:
Alternates “AUDIO 1” setting and
illumination display.
• OFF:
Erases the audio level indicator and
the equalization pattern indicator.
To select the telephone muting – TEL
This mode is used when a cellular phone system is
connected. Depending on the phone system used,
select either “MUTING 1” or “MUTING 2,” whichever
mutes the sounds from this unit. When shipped from
the factory, this mode is deactivated.
• MUTING 1: Select this if this setting can mute
the sounds.
• MUTING 2: Select this if this setting can mute
the sounds.
• OFF: Cancels the telephone muting.
To select the scroll mode – SCROLL
You can select the scroll mode for the name
display and disc information if it consists of more
than 8 characters. When shipped from the
factory, scroll mode is set to “ONCE.”
• ONCE: Scrolls only once.
• AUTO: Repeats the scroll (5-second
intervals in between).
• OFF: Cancels the scroll mode.
Note:
Even if the scroll mode is set to “OFF,” you can scroll
the display by pressing DISP for more than 1 second.
EN19-22.KD-S9R[E]f 9/19/00, 9:24 AM21