JVC KD-S50 CD Player User Manual


 
19
ENGLISH
TROUBLESHOOTING
What appears to be trouble is not always serious. Check the following points before calling a service
center.
Symptoms
CD cannot be played back.
CD sound is sometimes
interrupted.
“NO DISC” appears on the
display.
Sound cannot be heard from
the speakers.
SSM (Strong-station
Sequential Memory) automatic
preset does not work.
Static noise while listening to
the radio.
CD can be neither played back
nor ejected.
The unit does not work at all.
Remedies
Insert the CD correctly.
Stop CD play while driving
rough roads.
Change the CD.
Check the cords and
connections.
Insert a CD into the loading slot.
Insert it correctly.
Adjust it to the optimum level.
Check the cords and
connections.
Store stations manually.
Connect the antenna firmly.
Press and 0 at the
same time for more than 2
seconds. Be careful not to drop
CD when it is ejected.
Press and SEL at the
same time for more than 2
seconds to reset the unit. (The
clock setting and preset stations
stored in memory are erased.)
(See page 2.)
Causes
CD is inserted upside down.
You are driving on rough roads.
CD is scratched.
Connections are incorrect.
No CD is in the loading slot.
CD is inserted incorrectly.
The volume control is turned to
the minimum level.
Connections are incorrect.
Signals are too weak.
The antenna is not connected
firmly.
The CD player may function
incorrectly.
The built-in microcomputer may
function incorrectly due to noise,
etc.
EN18-20KD-S50[J]/f 11/6/01, 2:17 PM19