Filter
Top Products
14
ENGLISH
Storing your own sound
adjustment
You can adjust the sound modes (BEAT, SOFT,
POP: see page 13) to your preference and store
your own adjustments in memory.
• There is a time limit in doing the following
procedure. If the setting is cancelled before you
finish, start from step 1 again.
1
Call up the sound mode you want to
adjust.
See page 13 for details.
2
Select “BAS” (bass) or “TRE” (treble).
To turn ON/OFF the loudness function.
See page 12 for details.
Each time you press LOUD, the loudness
function turns on and off alternatively. (→ go
to step 5)
SCM
3
Adjust the bass or treble level.
See page 12 for details.
4
Repeat steps 2 and 3 to adjust the
other items.
5
Press and hold SCM until the sound
mode you have selected in step 1
flashes on the display.
Your adjustment made for the selected sound
mode is stored in memory.
6
Repeat the same procedure to store
other sound modes.
To reset to the factory settings
Repeat the same procedure and reassign the preset
values listed in the table on page 13.
LOUD
SCM
EN12-14KD-S50[J]/f 11/6/01, 2:16 PM14