Filter
Top Products
ENGLISH
44
Symptoms Remedies/Causes
MP3/WMA playback
• A longer readout time is required
(“Reading” keeps flashing on the display).
Do not use too many hierarchical levels and folders.
• Tracks do not play back in the order you
have intended them to play.
The playback order is determined by the file name. Folder
with numbers on the initial as their names are sorted in
numerical order. However, folder with no numbers on
the initial of their names are sorted according to the file
system of the CD.
• The elapsed playing time is not correct. This sometimes occurs during playback. This is caused
by how the tracks are recorded on the disc (eg. variable
bit rate).
• “Please Eject” appears on the display. Insert a disc that contains MP3/WMA tracks.
• “No File” appears on the display. Selected folder is an empty folder *
1
. Select another
folder that contains MP3/WMA tracks.
• “Not Support” appears on the display and
track skips.
Skip to the next track encoded in an appropriate format
or to the next non-copy-protected WMA track.
• Correct characters are not displayed (e.g.
album name).
This unit can only display letters (capital: A – Z,
small: a – z), numbers, and a limited number of symbols
(see page 37).
USB device
• Noise is generated. The track played back is not an MP3/WMA/WAV track.
Skip to another file. (Do not add the extension code
<.mp3>, <.wma>, or <.wav> to non-MP3/WMA/WAV
tracks.)
• “Reading” keeps flashing on the display. • Readout time varies depending on the USB device.
• Do not use too many hierarchy or folders.
• Turn off the power then on again.
• Do not pull out or connect the USB device repeatedly
while “Reading” is displayed on the display.
• “No File” appears on the display. Check whether the selected folder, the connected USB
device, or the iPod/iPhone contains a playable file.
• “Read Failed” appears on the display. The connected USB device is not working properly.
Connect the USB device again.
• Tracks/folders are not played back in the
order you have intended.
The playback order is determined by the file name.
Folders with numbers on the initial of their names
are sorted in numerical order. However, folders with
no numbers on the initial of their names are sorted
according to the file system of the USB device.
*
1
Folder that is physically empty or folder that contains data but does not contain valid MP3/WMA track.
EN38-45_KD-R900[J]f.indd 44EN38-45_KD-R900[J]f.indd 44 2/13/09 12:25:11 PM2/13/09 12:25:11 PM