Filter
Top Products
16
ENGLISH
4 Exit from the setting.
• If the PTY indicator lights up, PTY
Standby Reception is activated.
• If the PTY indicator flashes, PTY Standby
Reception is not yet activated.
To activate PTY Standby Reception, tune
in to another station (or service) providing
these signals. The PTY indicator will stop
flashing and remain lit.
To deactivate the PTY Standby Reception
Select “Off” in step 3 on page 15.
The PTY indicator goes off.
Tracking the same programme—
Network-Tracking Reception
When driving in an area where FM reception
is not sufficient enough, this receiver
automatically tunes in to another FM RDS
station of the same network, possibly
broadcasting the same programme with stronger
signals (see the illustration below).
When shipped from the factory, Network-
Tracking Reception is activated.
To change the Network-Tracking Reception
setting, see “AF-Regn’l” on page 36.
Programme A broadcasting on different
frequency areas (01 – 05)
PTY indicator appears.
EN14-19_LH911[EX_EU]f.indd 16EN14-19_LH911[EX_EU]f.indd 16 1/7/05 6:57:43 PM1/7/05 6:57:43 PM