Filter
Top Products
8
ENGLISH
Canceling the display
demonstration
When shipped from the factory, display
demonstration has been activated, and starts
automatically when no operations are done for
about 20 seconds.
• It is recommended to cancel the demonstration
before you use the unit for the first time.
To cancel the display demonstration, follow
the procedure below:
1
Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: see pages 31 and 32.)
The next-step-operation
buttons start flashing.
2
Press number button 1 to select
“MOVIE”—Movie category of the
PSM settings.
The “Graphics” setting screen appears on
the display.
3
Select “Off.”
4
Finish the setting.
To activate the display demonstration, repeat
the same procedure and select “Int Demo” or
“All Demo” in step
3
.
• For more details, see “To set the movie
demonstration—Graphics” on page 33.
Off
Int Demo
All Demo
EN07-09KD-LH1101[E_EX]f.p65 2/26/03, 11:43 AM8