JVC KD-G827 CD Player User Manual


 
42
ENGLISH
Symptoms Remedies/Causes
PICT—PSM
Download does not seem to finish. It takes quite a long time to download an
animation with many frames (see page 38).
Animation does not move.
The display graphic function does
not work correctly.
Wait until the operating temperature resumes.
You cannot select an image or
animation for “Set” in “Pict.”
(“Default” cannot be changed for
“Movie” and “Picture, ” or beeps
sound for “Slideshow.”)
Select an image only after downloading the
appropriate files in memory.
iPod/D. player playback
The iPod or D. player does not turn
on or does not work.
Check the connecting cable and its connection.
Update the firmware version.
Change the battery.
Buttons do not work as intended. The functions of the buttons have been changed.
Press MODE before performing the operation.
The sound is distorted. Deactivate the equalizer either on the unit or the
iPod/D. player.
“Disconnect” appears on the display. Check the connecting cable and its connection.
Playback stops. The headphones are disconnected during
playback. Restart the playback operation using
the control panel (see page 29).
No sound can be heard when
connecting an iPod nano.
Disconnect the headphones from the iPod nano.
No sound can be heard.
“Error 01” appears on the display
when connecting a D. player.
Disconnect the adapter from the D. player. Then,
connect it again.
“NO FILES” or “NO TRACK”
appears on the display.
No tracks are stored. Import tracks to the iPod or
D. player.
“Reset 01” – “Reset 07” appears on
the display.
Disconnect the adapter from both the unit and
iPod/D. player. Then, connect it again.
“Reset 08” appears on the display. Check the connection between the adapter and
this unit.
The iPod’s or D. player’s controls do
not work after disconnecting from
this unit.
Reset the iPod or D. player.
DAB
“No DAB Signal” appears on the
display.
Move to an area with stronger signals.
“Reset 08” appears on the display. Connect this unit and the DAB tuner correctly
and reset the unit (see page 2).
“Antenna Power NG” appears on the
display.
Check the cords and connections.
The DAB tuner does not work at all. Reconnect this unit and the DAB tuner correctly
and reset the unit (see page 2).
EN36-43KD-G827[EE]f.indd 42EN36-43KD-G827[EE]f.indd 42 12/23/05 9:53:35 AM12/23/05 9:53:35 AM