JVC KD-G327 CD Player User Manual


 
16
ENGLISH
When Alternative Frequency Reception
is activated (with AF selected), Network-
Tracking Reception is also activated
automatically. On the other hand, Network-
Tracking Reception cannot be deactivated
without deactivating Alternative Frequency
Reception. (See page 12.)
If you want to know more about RDS, visit
«http://www.rds.org.uk».
Disc operations
Caution for DualDisc playback
The Non-DVD side of a “DualDisc” does
not comply with the “Compact Disc Digital
Audio” standard. Therefore, the use of Non-
DVD side of a DualDisc on this product may
not be recommended.
General
This unit has been designed to reproduce
CDs/CD Texts, and CD-Rs (Recordable)/
CD-RWs (Rewritable) in audio CD (CD-DA),
MP3 and WMA formats.
MP3 and WMA “tracks” (words “file”
and “track” are used interchangeably) are
recorded in “folders.”
When a disc has been loaded, selecting
“DISC” for the playback source starts disc
play.
Inserting a disc
When a disc is inserted upside down, the disc
automatically ejects.
Do not insert 8 cm discs (single CD) and
unusual shape discs (heart, flower, etc.) into
the loading slot.
Playing a disc
While fast-forwarding or reversing on
an MP3 or WMA disc, you can only hear
intermittent sounds.
More about this unit
Basic operations
Turning on the power
By pressing SOURCE on the unit, you can
also turn on the power. If the source is ready,
playback also starts.
Turning off the power
If you turn off the power while listening to a
disc, disc play will start from where playback
has been stopped previously, next time you
turn on the power.
Tuner operations
Storing stations in memory
During SSM search...
– All previously stored stations are erased and
stations are stored newly.
– Received stations are preset in No. 1 (lowest
frequency) to No. 6 (highest frequency).
– When SSM is over, the station stored in
No. 1 will be automatically tuned in.
When storing a station manually, the
previously preset station is erased when a new
station is stored in the same preset number.
FM RDS operations
Network-Tracking Reception requires
two types of RDS signals—PI (Programme
Identification) and AF (Alternative
Frequency) to work correctly. Without
receiving these data correctly, Network-
Tracking Reception will not operate correctly.
If a Traffic Announcement is received by
TA Standby Reception, the volume level
automatically changes to the preset level (TA
VOL) if the current level is lower than the
preset level.
EN12-21_KD-G327_1[EX_EU]f.indd 16EN12-21_KD-G327_1[EX_EU]f.indd 16 11/2/05 4:59:33 PM11/2/05 4:59:33 PM