JVC KD-G327 CD Player User Manual


 
14
ENGLISH
Remote controller — RM-RK60
This unit can be remotely controlled as
instructed here (with an optionally purchased
remote controller). We recommend that you
use remote controller RM-RK60 with your unit.
Installing the lithium coin battery
(CR2025)
Aim the remote controller directly at the
remote sensor on the unit. Make sure there is
no obstacle in between.
Warning:
Do not install any battery other than
CR2025 or its equivalent; otherwise, it may
explode.
Store the battery in a place where children
cannot reach to avoid risk of accident.
To prevent the battery from over-heating,
cracking, or starting a fire:
– Do not recharge, short, disassemble,
heat the battery, or dispose of it in a fire.
– Do not leave the battery with other
metallic materials.
– Do not poke the battery with tweezers or
similar tools.
– Wrap the battery with tape and insulate
when throwing away or saving it.
Main elements and features
1 (standby/on attenuator) button
Turns the power on if pressed briefly or
attenuates the sound when the power is
turned on.
Turns the power off if pressed and held.
2 SRC (source) button
Selects the source.
3 R (reverse) / F (forward) buttons
Searches for stations if pressed briefly.
• Fast-forwards or reverses the track if
pressed and held.
Changes the tracks of the disc if pressed
briefly.
4 SOUND button
Selects the sound mode (C-EQ: custom
equalizer).
5 U (up) / D (down) buttons
Changes the FM/AM bands with U only.
Changes the preset stations with D only.
Changes the folder of the MP3/WMA
discs.
6 VOLUME – /+ buttons
Adjusts the volume level.
Caution:
EN12-21_KD-G327_1[EX_EU]1.indd 14EN12-21_KD-G327_1[EX_EU]1.indd 14 10/14/05 11:57:18 AM10/14/05 11:57:18 AM