JVC KD-G116 CD Player User Manual


 
18
ENGLISH
Symptoms Causes Remedies
General
Sound cannot be heard
from the speakers.
The volume level is set to
the minimum level.
Adjust it to the optimum
level.
Connections are incorrect. Check the cords and
connections.
The receiver does not
work at all.
The built-in microcomputer
may have functioned
incorrectly due to noise, etc.
Reset the receiver (see page
2).
FM/AM
SSM automatic presetting
does not work.
Signals are too weak. Store stations manually.
Static noise while listening
to the radio.
The antenna is not connected
firmly.
Connect the antenna firmly.
Disc playback
Disc automatically ejects. Disc is inserted upside
down.
Insert the disc correctly.
CD-R/CD-RW cannot be
played back.
Tracks on the CD-R/
CD-RW cannot be
skipped.
CD-R/CD-RW is not
finalized.
Insert a finalized CD-R/
CD-RW.
Finalize the CD-R/
CD-RW with the
component which you
used for recording.
Disc can be neither played
back nor ejected.
Disc is locked. Unlock the disc (see page
11).
The CD player may have
functioned incorrectly.
Eject the disc forcibly (see
page 2).
Disc sound is sometimes
interrupted.
You are driving on rough
roads.
Stop playback while driving
on rough roads.
Disc is scratched. Change the disc.
Connections are incorrect. Check the cords and
connections.
“NO DISC” appears on the
display.
No disc is in the loading
slot.
Insert a disc into the loading
slot.
Disc is inserted incorrectly. Insert the disc correctly.
Troubleshooting
What appears to be trouble is not always serious. Check the following points before calling a service
center.
EN14-19_KD-G116[U_UH]f.indd 18 10/9/04, 1:44:44 PM