JVC KD-DV4402 CD Player User Manual


 
ENGLISH
27SETTINGS
Menu Item Setting
PICTURE
MONITOR TYPE Select the monitor type to watch a wide screen picture on your monitor.
OSD POSITION Select the on-screen bar position on the monitor.
1 : Higher position
2 : Lower position (Guidance below the disc setup menu will disappear.)
AUDIO
DIGITAL AUDIO
OUTPUT
Select the signal format to be emitted through the DIGITAL OUT (Optical) terminal.
OFF : Cancels.
PCM ONLY : Select for an amplifier or a decoder incompatible
with Dolby Digital, DTS, MPEG Audio, or when
connecting to a recording device.
DOLBY DIGITAL/PCM : Select for an amplifier or a decoder compatible
with Dolby Digital.
STREAM/PCM : Select for an amplifier or a decoder compatible
with Dolby Digital, DTS, and MPEG Audio.
DOWN MIX When playing back a multi-channel disc, this setting affects the signals reproduced
through the LINE OUT jacks (and through the DIGITAL OUT terminal when “PCM
ONLY” is selected for “DIGITAL AUDIO OUTPUT”).
SURROUND COMPATIBLE : Select to enjoy multi-channel surround audio by
connecting an amplifier compatible with Dolby
Surround.
STEREO : Normally select this.
D. RANGE
COMPRESSION
You can enjoy a powerful sound at low or middle volume levels while playing a
Dolby Digital software.
AUTO : Select to apply the effect to multi-channel
encoded software (excluding 1-channel and
2-channel software).
ON : Select to always use this function.
OTHER
DivX
REGISTRATION
This unit has its own Registration Code. Once you have played back a disc in which
the Registration Code recorded, this unit’s Registration Code is overwritten for
copyright protection.
FILE TYPE (DISC) Select playback file type when a disc contains different types of files.
AUDIO : Play MP3/WMA/WAV files.
VIDEO : Play DivX/MPEG Video files.
AUDIO + VIDEO : Play MP3/WMA/WAV/DivX/MPEG Video files.
EN22-27_DV4402_001A_f.indd 27EN22-27_DV4402_001A_f.indd 27 12/12/07 11:56:07 AM12/12/07 11:56:07 AM