Filter
Top Products
23
ENGLISH
SOUND ADJUSTMENTS
Adjusting the sound
You can adjust the sound characteristics to your
preference.
1
Select the item you want to adjust.
Each time you press the
button, the adjustable
items change as follows:
For KD-AR800/KD-G800:
For KD-G700:
Indication To do: Range
FAD*
1
Adjust the front R06 (Rear only)
and rear speaker |
balance. F06 (Front only)
BAL Adjust the left L06 (Left only)
and right speaker |
balance. R06 (Right only)
LOUD Boost low and
high frequencies
to produce a
well-balanced
sound at low
volume level.
WOOFER*
2
Adjust the 00 (min.)
(only for subwoofer |
KD-AR800/ output level. 08 (max.)
KD-G800)
VOL*
3
Adjust the 00 (min.)
volume. |
30 or 50 (max.)*
4
*
1
If you are using a two-speaker system, set the fader
level to “00.”
*
2
This takes effect only when a subwoofer is
connected.
*
3
Normally the control dial works as the volume
control. So you do not have to select “VOL” to
adjust the volume level.
*
4
Depending on the amplifier gain control setting.
(See page 30 for details.)
2
Adjust the setting.
3
Repeat steps
1
and
2
to adjust the
other items.
To increase the level or
turn on the loudness
To decrease the level or
turn off the loudness
LOUD ON
|
LOUD OFF
VOL
(volume)
FAD
(fader)
BAL
(balance)
LOUD
(loudness)
WOOFER
(subwoofer)
VOL
(volume)
FAD
(fader)
BAL
(balance)
LOUD
(loudness)
Ex. 1: When you adjust “FAD” (fader)
Ex. 2: When you turn on the loudness
Indication pattern changes as
you adjust the fader or balance.
LOUD indicator
EN23-25_KD-AR800_G800[J]f.p65 8/12/03, 11:10 AM23