Filter
Top Products
35
ENGLISH
Remedies
Insert discs into the magazine.
Insert discs correctly.
Insert the magazine.
Connect this unit and the
CD changer correctly and press
the reset button of the CD
changer.
Press the reset button of the
CD changer.
Press the reset button on the
panel holder after detaching the
control panel. (The clock setting
and preset stations stored in
memory are erased.)
(See page 2.)
Causes
No disc is in the magazine.
Discs are inserted upside down.
No magazine is loaded in the
CD changer.
This unit is not connected to the
CD changer correctly.
The built-in microcomputer may
function incorrectly due to noise,
etc.
Symptoms
• “NO DISC” appears on
the display.
• “NO MAG” appears on
the display.
• “RESET 8” appears on
the display.
• “RESET 1” – “RESET 7”
appears on the display.
• The CD changer does
not work at all.
CD Changer
About mistracking:
Mistracking may result from driving on extremely rough roads. This does not damage the unit and the disc,
but will be annoying.
We recommend that you stop disc play while driving on such rough roads.
EN33-37_KD-AR400_G400[J]f.p65 9/26/03, 4:20 PM35