JVC KD-AR370 CD Player User Manual


 
26
ENGLISH
Symptoms Remedies/Causes
DAB
“noSIGNAL” appears on the display.
Move to an area with stronger signals.
“RESET 8” appears on the display. Connect this unit and the DAB tuner correctly
and reset the unit (see page 2).
“ANTENANG” appears on the
display.
Check the cords and connections.
The DAB tuner does not work at all. Reconnect this unit and the DAB tuner correctly
and reset the unit (see page 2).
iPod/D. player playback
The iPod or D. player does not turn
on or does not work.
Check the connecting cable and its connection.
Update the firmware version.
Change the battery.
Buttons do not work as intended. The functions of the buttons have been changed.
Press MODE before performing the operation.
The sound is distorted. Deactivate the equalizer either on the unit or the
iPod/D. player.
“NO IPOD” or “NO DP” appears on
the display.
Check the connecting cable and its connection.
Playback stops. The headphones are disconnected during
playback. Restart the playback operation using
the control panel (see page 18).
No sound can be heard when
connecting an iPod nano.
Disconnect the headphones from the iPod nano.
No sound can be heard.
“ERROR 01” appears on the display
when connecting a D. player.
Disconnect the adapter from the D. player. Then,
connect it again.
“NO FILES” or “NO TRACK”
appears on the display.
No tracks are stored. Import tracks to the iPod or
D. player.
“RESET 1” – “RESET 7” appears on
the display.
Disconnect the adapter from both the unit and
iPod/D. player. Then, connect it again.
“RESET 8” appears on the display. Check the connection between the adapter and
this unit.
The iPod’s or D. player’s controls do
not work after disconnecting from
this unit.
Reset the iPod or D. player.
EN24-27KD-G421[EX_EU]f.indd 26EN24-27KD-G421[EX_EU]f.indd 26 11/22/05 5:45:47 PM11/22/05 5:45:47 PM