Filter
Top Products
21
Blinks
Blinks
Decrements by 1
Blinks
Blinks
Blinks
Blinks
OR
SET
OR
OR
SET
OR
ENTER
OR
1
2
3
4
5
6
1
2
3
4
5
6
Example)
When track No. 1 and 2 are selected
1
2
3
4
5
6
1
2
3
4
5
2 Press SET on the main unit or on the remote control unit.
3 Select a track to be joined with the previous track.
Select a track number by turning the jog dial on the main unit or by pressing < / 4 or
¢ / > on the remote control unit.
• You can also use the numeric keys on the cover panel of the remote control to select
a track number. To select a track, see “Selecting a track with the numeric keys” on
page 9.
Example) To join track numbers 1 and 2, select track number 2.
4 Press SET on the main unit or on the remote control unit.
The selected track numbers blink in the music calendar, indicating that these tracks will
be joined into one.
• If you selected wrong track numbers, press 7STOP/CANCEL on the main unit or
CANCEL on the remote control unit and repeat from step 3.
• If the display shows “TRACK PROTECTED”, one of the selected tracks has been
protected against accidental erasure by another component. You cannot edit such a
protected track. To cancel the editing, press EDIT on the main unit or on the remote
control unit.
5 Press ENTER on the main unit or on the remote control
unit.
The change made above is entered temporarily in memory. The display shows
“EDITING” and the TOC indicator lights up.
6 Press 0 on the main unit or on the cover panel of the
remote control unit to eject the MD.
The data in memory is written in the MD before it is ejected.
The display shows “UTOCwriting” during MD writing operation.
• Be careful not to apply impact to the MD recorder during writing temporarily stored
data into the MD. Otherwise the recording may not be able to play later.
• The data in memory is written in the MD also when the power is turned off while
“EDITING” is being displayed.
To cancel editing:
Press EDIT repeatedly on the main unit or on the remote control unit before pressing
ENTER in step 5.
To restore the original tracks from the track obtained by
joining:
Use the DIVIDE editing function.
See “Dividing a track (DIVIDE)” on page 19.
EN17-25.XM-448BK[J]/f 99.1.28, 3:23 PM21