Filter
Top Products
Page 10
÷ You can skip to a desired program step with the 4/¢ button.
If you have programmed all disc (1~5) as “AL”, pressing ¢ (or
4) will skip to the next (or previous) disc.
÷ When the DISC SKIP button is pressed during program play, the
playback skips to the next programmed disc.
To check the program contents
Press the CALL button during stop mode. Each time the CALL button
is pressed, the program contents are displayed in the programmed
order.
÷ When the unit is in program play mode, press the 7 button to enter
stop mode and then operate the CALL button.
To modify the program contents
Press the CALL button until the display shows the program step to be
corrected. Enter the new disc number and/or track number referring
to steps 2 and 3 above.
To delete a program step, press the CALL button until the display
shows the program step to be deleted and then press the 7 STOP/
CANCEL button on the main unit or the CANCEL button on the remote
control unit. You can also delete a displayed program step during
programming.
÷ When the unit is in program play mode, press the 7 button to enter
stop mode and then delete the program step.
To add discs/tracks to the program during program play-
back
Specify the disc number by pressing the DISC button and, with XL-
FZ258BK, the track number by pressing the track buttons.
The specified disc/track is added to the end of the program being
played back.
÷ For XL-FZ158BK, only the disc number can be specified and the
entire disc is added to the program. For this operation, it is not
possible to utilize the 4/¢ SEARCH buttons.
To exit program mode
Press the PLAY MODE or RANDOM button on the main unit, or the
CONTINUE or RANDOM button on the remote control unit, and the
program mode is cancelled. However, the program contents are not
erased and, whenever the program mode is selected, you can play the
tracks in programmed order.
To clear the program
In stop mode, press the 7 STOP/CANCEL button on the main unit
repeatedly. The program contents will be cleared step by step.
To clear the entire program, press the 0 OPEN/CLOSE button on the
main unit in stop mode. The program contents will be entirely cleared,
however, the program mode is not cancelled.
You can play only the favorite tracks in any desired order.
1. In stop mode, press the PLAY MODE button on the main unit
or the PROGRAM button on the remote control unit so that the
PROGRAM indicator lights on the display.
2. Select the disc which contains the track to be programmed
with the DISC button.
“AL” (all tracks) appears on the display.
To program the entire disc
Skip step 3 below. When the track number is not specified after
selecting the disc number, all tracks on the selected disc are
programmed.
3. For XL-FZ258BK, select the track number by pressing the track
buttons. For XL-FZ158BK, select the track number by pressing
the 4/¢ SEARCH button and then the MEMORY button.
Refer to “Specifying a desired track” on page 8 for entering the
track number. For XL-FZ158BK, press the MEMORY button with
the desired track number shown on the display.
When the selected track number is programmed, the following
display appears.
÷ For XL-FZ258BK , you can also use the 4 /¢ SEARCH button
then the MEMORY button to select a track number.
÷ If you want to cancel the displayed program step, press the 7
STOP/CANCEL button on the main unit or the CANCEL button on
the remote control unit and then enter the new disc number and/
or track number.
4. Repeat steps 2 and 3 for other tracks and/or discs to be
programmed.
You can program up to 32 steps.
5. Start playback by pressing the 3 PLAY/8 PAUSE button on the
main unit or the 3 button on the remote control unit.
The programmed tracks and/or discs are played in the pro-
grammed order.
Playing tracks in a
desired order
PLAY MODE
3 PLAY/
8 PAUSESTOP/CANCEL
Track buttons
Display shows the disc
number and the track
number selected for step 1.
VARIOUS PLAYBACK PATTERNS
STANDBY
CALL
MEMORY
RANDOM
PLAY MODE REPEAT
DISC
XL-FZ258 COMPACT DISC AUTOMATIC CHANGER
DISC SKIP SEARCH
STOP/CANCEL
PLAY/PAUSE
OPEN/CLOSE
EXCHANGE
1 2 3 4 5
6 7 8 9 10 +10
PHONES LEVEL
MIN MAX
PHONES
123
4
5
/
POWER
PLAY & EXCHANGE SYSTEM
DISC
5
1 BIT P E M D D CONVERTER
RECEIVED
DISC TRACK STEP
PROGRAM
1 245
9
XL-FZ258_J_4_p1-p15 06.6.19, 10:52 AM10