JVC VS-DT2000 Stereo System User Manual


 
10
Getting Started
English
Example of attachment (Speakers)
The speakers can be attached to a wall.
Attach the bracket (supplied) to the wall using two screws (not supplied) and place the Speaker onto the bracket.
Then, use the wing bolt (supplied) to fix the Speaker firmly to the bracket.
Do not place anything on top of the Center Unit. Doing so may cause the Center Unit to fall, causing malfunctioning and/or
injury.
Do not climb onto the Center Unit or hang from it. Doing so may damage the Center Unit and/or cause injury. Special care
must be taken in this respect when there are small children in the home.
Avoid sandwiching the cords between the Center Unit and wall. This may upset the Center Unit’s balance, causing the Center
Unit to fall.
Make sure that the cords will not interfere with daily activities and that the users will not trip over them. Do not pull the con-
nected cords with excessive force.
Check regularly that none of the screws are loose.
In the event that the Center Unit has fallen, turn off the power, disconnect its power plug from the power outlet, and contact
your dealer for an inspection and repairs. Continued use of the Center Unit may result in a fire or electric shocks.
Do not place valuables (breakables) underneath the location where the Center Unit is attached. They will be damaged if the
Center Unit should fall.
The manufacturer accepts absolutely no liability for any accidents or damage resulting from inadequate assembly or mount-
ing, insufficient strength of attachment, misuse or abuse, or natural disasters.
Wall
Bracket (supplied)
Wing bolt (supplied)
Screws (not supplied)
VS-DT2000[US-UW]_EN.book Page 10 Friday, March 8, 2002 3:09 PM