JVC TH-M606 Stereo System User Manual


 
Connections
9
The following procedure explains the front speaker assembly. The
assembly of both the front and surround speakers are done in the
same manner.
NOTE
The stands and the base plates are commonly used for both front and
surround speakers assembly.
Before assembling —
Prepare a Phillips screwdriver (not supplied).
Take care not to drop the base plate while assembling; otherwise,
it may cause damage to the floor or injury.
1
You can route the speaker cords through one on the three
grooves on the base plate depending on the speaker layout.
Depending on the installing condition, you can assemble the
front and surround speakers without the stands. In such a
case, attach the speaker directly to the base plate instead of
the stand.
2
3
Completion
Assembling the front and
surround speakers
Base plate (×4)
Stand (×4)Front speaker
(×2)
Surround speaker
(×2)
Stand
Speaker cord
(supplied)
Base plate
Bottom
Black
Red
Silver
Screw M5 x 25 mm (1 inch) (supplied)
Copper
Speaker
Stand
Black
White
Screw M5 x 25 mm
(1 inch) (supplied)
with stand without stand
This page is for
TH-M606-505-501-303-301[JC]-04Start.fm Page 9 Wednesday, March 24, 2004 1:41 PM