JVC RX-8030VBK Stereo System User Manual


  Open as PDF
of 114
 
45
CD changer
For RX-8030VBK:
After selecting “CDDSC” by pressing CONTROL repeatedly, you
can perform the following operations on a CD changer:
For RX-7030VBK/RX-7032VSL:
After pressing CD DISC, you can perform the following operations
on a CD changer:
3: Start playing.
4: Return to the beginning of the current (or previous)
track.
¢: Skip to the beginning of the next track.
7: Stop playing or recording.
8: Pause playing. To resume, press 3.
1 – 6, 7/P: Select the number of a disc installed in a CD
changer.
After pressing CD, you can perform the following operations on a
CD changer:
1 – 10/0, +10:Select a track number directly.
For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10/0.
For track number 30, press +10, +10, then 10/0.
Example:
• Selecting disc number 4, track number 12, and starting playback.
For RX-8030VBK:
1. Press CONTROL repeatedly until “CDDSC” appears on the
display window, then press 4.
2. Press CD, then press +10, 2.
For RX-7030VBK/RX-7032VSL:
1. Press CD DISC, then press 4.
2. Press CD, then press +10, 2.
If your CD changer is of 200-disc loading capability (except for
XL-MC100 and XL-MC301),
you can do the following operations using the 10 keys after pressing
CD.
1. Select a disc number.
2. Then select a track number (always enter two digits).
3. Start playback.
Examples:
• Selecting disc number 3, track number 2, and starting playback.
Press 3, then, 0, 2, then 3.
• Selecting disc number 10, track number 5, and starting playback.
Press 1, 0, then, 0, 5, then 3.
• Selecting disc number 105, track number 12, and starting
playback. Press 1, 0, 5, then 1, 2, then 3.
Turntable
After pressing PHONO, you can perform the
following operations on a turntable:
3: Start playing.
7: Stop playing.
CD recorder
For RX-8030VBK: After pressing CDR (or selecting “CDR” by
pressing CONTROL repeatedly), you can perform the following
operations on a CD recorder:
For RX-7030VBK/RX-7032VSL: After pressing TAPE/CDR (or
TAPE/CDR CONTROL), you can perform the following operations
on a CD recorder:
3: Start playing.
4: Return to the beginning of the current (or previous)
track.
¢: Skip to the beginning of the next track.
7: Stop playing or recording.
8: Pause playing. To resume, press 3.
1 – 10/0, +10: Select a track number directly.
For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10/0.
For track number 30, press +10, +10, then 10/0.
REC PAUSE: Enter recording pause by pressing this button.
To start recording again, press this button then 3.
Cassette deck
For RX-8030VBK: After pressing TAPE/MD (or selecting “TAPE”
by pressing CONTROL repeatedly), you can perform the following
operations on a cassette deck:
For RX-7030VBK/RX-7032VSL: After pressing TAPE/CDR (or
TAPE/CDR CONTROL), you can perform the following operations
on a cassette deck:
3: Start playing.
REW: Fast wind the tape from right to left.
FF: Fast wind the tape from left to right.
7: Stop playing or recording.
8: Pause playing. To resume, press 3.
REC PAUSE: Enter recording pause by pressing this button.
To start recording again, press this button then 3.
MD recorder
After pressing TAPE/MD (or selecting “TAPE*” by
pressing CONTROL repeatedly), you can perform the following
operations on a MD recorder:
3: Start playing.
4: Return to the beginning of the current (or previous)
track.
¢: Skip to the beginning of the next track.
7: Stop playing or recording.
8: Pause playing. To resume, press 3.
REC PAUSE: Enter recording pause by pressing this button.
To start recording again, press this button then 3.
*
Selecting “TAPE” will allow you to control the MD recorder.
RX-8030V
ONLY
Note:
You can use either source selection buttons or the control button (CONTROL for RX-8030VBK or TAPE/CDR CONTROL for RX-7030VBK/
RX-7032VSL) to activate the buttons for the target source. If you press one of the source selection buttons, the playing source also
changes. On the other hand, pressing the control button does not change the playing source.
RX-8030V
ONLY
42-52_8030&7030[J]10.pm6 03.2.13, 2:45 PM45
 previous next