Filter
Top Products
°6
O0
TAPE
TAPE A/B
@ ©o=,A©_©o..°..kT .y._...=._=
EJECT
(Deck A)
I,-: Tape indicator
-,'RPE 1
D_-Q
Ll"
Deck indicators
* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section
TAPE A/B
TAPE _,-
44
! EJECT
(Deck B)
'Ihe Cassette Deck allows you to play, recoM, and dub audio tapes.
i_Listening to type 1tape is suitable for this Cassette Deck.
The use of tapes longer than 120 minutes is not rec-
ommended, since characteristic deterioration may
occur and these tapes easily jam in the pinch-rollers
and the capstans,
One Touch Play
By pressing the TAPE I_ button, the System will come on, and if
a tape is in the deck, it will start to play. If no tape is loaded, "NO
TAPE' appears on the display, the Syste n will come on and wait
for you to insert a tape, or select another function.
Playing a Tape
You can use either Deck A or Deck B a/a time for playback.
1 Press the A EJECT part for the deck you
want to use.
2 When the cassette holder opens, put a cas-
sette in, with the exposed part of the tape
down, toward the base of the Unit.
The tape will travel h-ore the left to right.
Tape travelling direction
• If the cassette holder does not open, turn the System off,
then back on and press the -----EJECT part again.
3
Close the cassette holder gently.
When both Deck A and Deck B contain a tape, the last deck to
have a tape inserted is selected.
The selected Deck is shown by the Deck indicator "A" or "B'.
For example, when the Deck A is selected, the Deck indicator
"A" lights up.
• To change the deck, press the TAPE A/B button. Each time
you press the button, Deck A or Deck B is alternately
selected.
4 Press the TAPE I_ button.
The Tape indicator (_"9 blinks on the display and the tape is
played back.
The Cassette Deck automatically stops when one side of the
tape has finished playing.
To stop playing, press the • button.
TO remove the tape, stop the tape, and press the --_EJECT part
to open the Cassette Holder.
To Fast-Wind A Tape
During playback or in Stop ]node, press the _1,- (FF) burton on the
Unit to fast-wind the tape onto the right side of the cassette without
playing.(You can also use the I,-_.t button on the Remole Control.)
During playback or in Stop ]node, press the _1_1 (REW) button on
the Unit to fast-wind the tape onto the left side of the cassette with-
out playing.(You can also use the _ button on the Remote Con-
trol.)
During fast-winding the tape, the Tape indicator (_) goes out.
During fast-winding, the status bat illumination at the bottom of
the display moves from left to right.
During rewinding, it moves from right to left.
• 'Ihe Cassette Deck automatically stops when one side of the
tape has finished playing.
I_1During fast-winding the tape, you can change the tape travelling
direction by pressing the _ (FF) or _1 (REW) button.
16