JVC MX-K50 Stereo System User Manual


 
24
Specifications
Amplifier section CA-MXK50
Output Power:
100 W per channel, min. RMS, driven into 6 at 1 kHz with no
more than 10% total harmonic distortion.
Audio input sensitivity/Impedance (at 1 kHz)
AUX: 400 mV/50 k
Speakers/Impedance: 6 – 16
Tuner
FM tuning range: 87.50 MHz – 108.00 MHz
AM tuning range: 530 kHz – 1 710 kHz
CD player
CD Capacity: 3 CDs
Dynamic range: 85 dB
Signal-to-noise ratio: 85 dB
Cassette deck
Frequency response
Normal (type I): 50 Hz — 14 000 Hz
Wow and flutter
0.15% (WRMS)
General
Power requirement: AC 120 V , 60 Hz
Power consumption: 120 W / 158 VA (at operation)
17 W (on standby)
Dimensions (approx.): 270 mm x 317 mm x 449 mm (W/H/D)
(10
11
/16 in. x 12
1
/2 in. x 17
11
/16 in.)
Mass (approx.): 8.6 kg (19.0 lbs)
Supplied accessories
See page 6.
Speaker section SP-MXK50
Type: 3-way bass-reflex type
Speaker units: Woofer: 13.5 cm (5
3
/8 in.) cone x1
Midrange: 5 cm (2 in.) cone x1
Tweeter: 2 cm (
13
/16 in.) dome x1
Power handling capacity:
100 W
Impedance: 6
Frequency range: 32 Hz — 20 000 Hz
Sound pressure level: 81 dB/W•m
Dimensions (approx.): 228 mm x 318 mm x 255 mm (W/H/D)
(9 in. x 12
9
/6 in. x 10
1
/16 in.)
Mass (approx.): 3.5 kg (7.8 lbs) each
Design and specifications are subject to change without notice.
EN17-24.MX-K50[J].pm6 02.2.18, 8:21 PM24