JVC MX-DVA5 Stereo System User Manual


 
– 12 –
English
Selecting the Sound Modes
This function only affects the playback sound, but does not
affect your recording.
You can select one of the 6 preset sound modes (3 surround
modes and 3 SEA — Sound Effect Amplifier — modes).
To select the sound modes, turn the
SOUND MODE control until the sound
mode you want appears on the display.
As you turn the control, the sound modes change as
follows:
Surround modes*:
D.CLUB: Increases resonance and bass.
HALL: Adds depth and brilliance to the sound.
STADIUM: Adds clarity and spreads the sound, like in an
outdoor stadium.
SEA (Sound Effect Amplifier) modes:
ROCK: Boosts low and high frequency. Good for
acoustic music.
POP: Good for vocal music.
CLASSIC: Good for classical music.
OFF: Cancels the sound mode.
SOUND
MODE
SOUND MODE indicator
also lights up on the display
* Surround elements are added to the SEA elements to create a
being-there feeling in your room.
When one of these modes is selected, the SOUND MODE
indicator lights up as —
While one of the SEA modes (SEA elements without surround
elements) is selected, the SOUND MODE indicator lights up as
When using the remote control, press SOUND
MODE repeatedly.
Each time you press the button, the sound modes
change as follows:
Creating a Being-There Feeling
By adding breadth and depth to the reproduced sounds, this
function (3D Sound) can create a being-there feeling while
playing back software encoded with Dolby Digital.
When the “DIGITAL OUTPUT” setting is set to
“BITSTREAM” (see page 29), this function does not work.
On the remote control ONLY:
Press 3D SOUND during play.
Each time you press the button, 3D Sound turns
on and off (and the current setting is shown on the
TV screen).
D.CLUB
(Dance CLUB)
OFF
(Canceled)
HALL STADIUM ROCK
POP
CLASSIC
D.CLUB
(Dance CLUB)
OFF
(Canceled)
HALL STADIUM ROCK
POP
CLASSIC
EN01-13MX-DVA5[C]_f 01.8.30, 2:34 PM12