Filter
Top Products
– 15 –
Loading Discs
On the unit ONLY:
1
Press 0 for the disc tray
(CD1, CD2, or CD3) you
want to load a disc onto.
The unit automatically turns on
and the disc tray comes out.
2
Place a disc correctly on the circle of the disc
tray, with its label side up.
• When using a CD single (8 cm), place it on the inner
circle of the disc tray.
3
Press the same 0 you have
pressed in step
1
.
The disc tray closes.
4
Repeat steps
1
to
3
to place other discs.
When loading more than one disc
When you press 0 for the next tray you want to place another disc
onto, the first disc tray automatically closes and then the next tray
comes out.
Track number
Elapsed playing time
Tracks of the currently playing CD (Track
numbers exceeding 16 are not displayed.)
CD3
CD2
CD1
TRACK
1 2 3 4
5 6 7 8
9 1011 12
1314 1516
Playing Back Discs
CORRECT
INCORRECT
Playing Back the Entire Discs—Continuous Play
You can play discs continuously.
• If you start Continuous Play with an MP3 disc, you can
select a track you want to start playback with.
7 For audio CDs
1
Load discs.
2
Press one of the disc number
(CD1, CD2, or CD3) buttons
for the disc you want to play.
The unit searches for the disc, and
starts playing with the first track of the
selected disc.
7 For MP3 discs
1
Load discs.
2
Press one of the disc number
(CD1, CD2, or CD3) buttons
for the disc you want to play.
The unit searches for the disc (it may
takes time), and the following
information appears on the display.
* If the group title cannot be shown at a time (exceeding
10 characters), the title scrolls.
TRACK
1 2 3 4
5 6 7 8
9 1011 12
1314 1516
Total playing time
Total track number
TITLE
1 2 3 4
5 6 7 8
9 1011 12
1314 1516
Group title of the 1st group*
1 2 3 4
5 6 7 8
9 1011 12
1314 1516
Group number flashes
CD3
CD2
CD1
EN13-20.HX-Z3[J]f.pm6 4/26/02, 10:43 AM15