Filter
Top Products
12
English
To stop playing the MD, press the 7 button. The following in-
formation for the MD is displayed.
To stop playing and remove the MD, press the MD
0 button
to eject the MD.
To pause, press the MD
38 button. The playback time blinks on
the display.
To cancel pause, press the same button again. Play continues
from the point where it was paused.
Displaying the Disc Title ——————
You can display the disc title of the MD during Stop mode. If the
disc title is not given yet, “NO TITLE” appears.
During Stop mode, press the DISPLAY/CHARA button on
the Remote Control.
Each time you press the button, the display changes as follow.
Total track number and total playback time
=Disc title=Remaining
time (recordable capacity) of MD (e.g. REM. 23:00)=(back to the
beginning)
To Select a Track or Passage within
a Track ——————————————
During playback, press the 4 or ¢ button to select the track you
want.
The selected track starts playing.
‡ 3UHVVýWKHý
¢ýEXWWRQýRQFHýWRýVNLSýWRýWKHýEHJLQQLQJýRIýWKHý
QH[WýWUDFNï
‡ 3UHVVýWKHý4ýEXWWRQýWRýVNLSýWRýWKHýEHJLQQLQJýRIýWKHýWUDFNýEHð
LQJýSOD\HGïý3UHVVýWZLFHýTXLFNO\ýWRýVNLSýWRýWKHýEHJLQQLQJýRIý
WKHýSUHYLRXVýWUDFNï
Search Play ————————————
Holding down the 4 or ¢ button, during playback, will fast for-
ward/backwards the MD so you can quickly find a particular pas-
sage in the track you are listening to.
You can program the playing order of the tracks using the Remote
Control.
■ You can program up to 32 tracks in any desired order including
the same tracks.
■ You can only make a program when the MD Player is stopped.
■
1. Insert an MD.
■
2. Press the MD
38
button.
■
3. Press the
7
button to stop the MD.
■
4. Press the PROGRAM button.
The System enters the programming mode and the "MD PRO-
GRAM" indicator lights up.
■
5. Press the UP, DOWN, >, or < button to
select the track to program.
UP button: Increases the track number by 1.
DOWN button: Decreases the track number by 1.
>
button: Increases the tenth digit of the track number.
< button: Decreases the tenth digit of the track number.
• Example: for track 2, press the UP button twice. For track 12,
press the > button, then press the UP button twice (or simply
press the UP button 12 times).
■
6. Press the SET button.
■
7. Repeat steps 5 and 6 to select the other
tracks for the program.
You can see the total playback time of programmed tracks on
the display. Also, you can see the programmed tracks on the
music calender.
■
8. Press the MD
38
button.
The System plays the tracks in the order you have programmed
them.
■ You can skip to a particular program track by pressing the 4
or ¢ button during Program Play.
■ To stop playing, press the 7 button.
To confirm the programmed tracks while the MD Player is
stopped, press the 4 or ¢ button; the tracks making up the
program will successively be displayed in the programmed order.
To delete all the tracks in the program, press the
7 button re-
peatedly until all the tracks are cleared. Turning off the power or
pressing the MD
0 button to eject the MD will also clear the pro-
grammed tracks.
To exit the program mode once, while the MD Player is
stopped, press the PROGRAM button to light off the "MD PRO-
GRAM" indicator.
Note: If the total playback time of the programmed tracks exceeds
150 minutes, the total playback time will go out on the dis-
play.
To Modify the Program ———————
Modify the contents of the program while the MD Player is stopped.
Each time you press the 7 button, the last track in the program is de-
leted. To add new tracks to the end of the program, repeat above
steps 5 to 7.
The tracks will play in no special order when you use this mode.
■
1. Press the RANDOM button on the Remote
Control.
The "MD RANDOM" indicator lights up on the display.
■
2. Press the MD
38
button.
The tracks are played in random order.
To skip a track during playback, press the ¢ button to jump
to the next track in the random sequence. Press the
4 button to
jump back to the start of a track being played.
To exit Random Play mode, press the RANDOM button to light
off the “MD RANDOM” indicator and carry out Normal Play or
Program Play, or press the MD
0 button to eject the MD.
You can set the program or individual track playing to repeat as
many times as you like.
Press the REPEAT button on the Remote Control.
The Repeat indicator changes with each press of the button, as
shown below.
Programming the
Playing Order of the Tracks
Total track number Total playback time
PROGRAM
Random Play
Repeating Tracks
DOWN
UP
SET
Program order number
Total playback time of the
programmed tracks
(After 2 seconds)
FS-MD9000(J)-e.fm Page 12 Thursday, July 30, 1998 1:19 PM