Filter
Top Products
9
English
■
5. Press the SET button.
"STORED" appears and, after 1 second, the display returns to
the broadcast frequency display.
■
6. Repeat above steps 1 to 5 for each station
you want to store in memory with a preset
number.
To cancel the presetting, press the CANCEL button in step
3 or 4.
To change the preset stations, repeat the same steps as
above.
Auto Presetting ——————————
In each band, you can automatically preset FM-30, AM-15 stations.
Preset numbers will be allocated as stations are found, starting from
the lowest station and moving up the frequency.
■
1. Select a band by pressing the TUNER
BAND button.
■
2. Press the AUTO PRESET button on the
Remote Control for more than two sec-
onds.
■
3. Repeat steps 1-2 for the other band.
■
If you want to change the preset stations, carry out the Manual
Presetting for the desired preset numbers.
CAUTION: If the System is unplugged or if a pow-
er failure occurs, the preset stations will be
erased after about 24 hours. If this happens, you
will need to preset the stations again.
When you are tuned in an FM broadcast, the "STEREO" indicator
lights up and you can hear stereo effects.
If an FM stereo broadcast is hard to receive or noisy, you can select
Monaural mode. Reception improves, but you lose any stereo effect.
Press the FM MODE button on the Remote Control so that
the "MONO" indicator lights up on the display.
To restore the stereo effect, press the FM MODE button on the
Remote Control so that the "MONO" indicator goes off.
■■
Using the CD Player
You can use Normal, Random, Program or Repeat Play. Repeat
Play can repeat all the tracks or just one of the tracks on the CD.
Here are the basic things you need to know to play a CD and locate
the different tracks on it.
The Quickest Way To Start a CD Is With the One Touch
Operation
■
Press the CD38 button.
• The power is automatically turned on. If a CD is already
inserted, it will start playing from the first track.
• If no CD is inserted, "NO DISC" appears on the display and the
CD Player remains in Stop mode.
■
1. Press the CD 0 button on the Unit.
The CD holder opens.
■
2. Place a CD, with its label side up as shown
below.
■
3. Press the CD 0 button again to close the
CD holder.
• To close the CD holder and play the CD, you can press the CD 38
button.
TUNER
BAND
AUTO
PRESET
(for 2 seconds)
To Change the FM
Reception Mode
MONOSTEREO
FM MODE
><
VOLUME
CD
TUNER
BAND
MD
DOWN
SET
UP
TREBLE CANCELBASS
RANDOM REPEATPROGRAM
AUTO
PRESET
DISPLAY
/CHARA
EDIT
/TITLE
AHB.
SUPER PRO
FM MODE TAPE/AUXCLOCK
SLEEPDIMMER
REMOTE CONTROL RM-RXFSMD9000
POWER
PRESET
TUNING
POWER
TAPE
/AUX
VOLUME
TUNER
BAND
CD
MD
CD
MD
OPEN/CLOSE
TIMER/
SNOOZE
CLOCKUPMULTI CONTROLDOWN
U
L
T
R
A
C
O
M
P
A
C
T
C
O
M
P
O
N
E
N
T
S
Y
S
T
E
M
F
S
-
M
D
9
0
0
0
REC
PAUSE
CD SYNCHRO
REC
UPDOWN
EJECT
AHB.
SUPER PRO
SET
<
PROGRAM REPEAT
RANDOM
UP
>
DOWN
CD
38
7
Repeat indicator
CD Holder
Music calender
4
7
CD
0
CD
38
Play mode indicator
Track number, Playing time, Preset number
OVER indicator which lights up if the
number of tracks of the CD exceeds 20.
When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
4
¢
¢
To Insert a CD
STANDBY
FS-MD9000(J)-e.fm Page 9 Thursday, July 30, 1998 1:19 PM