Filter
Top Products
9
English
■■
Using the Tuner
Band display, Frequency display,
Preset channel
FM mode indicators
SUBWOOFER
LEVEL
VOLUME
CD
TUNER
BAND
MD
/TAPE
DOWN
SET
UP
TREBLE CANCELBASS
RANDOM REPEATPROGRAM
AUTO
PRESET
VOLUME
GAIN SELECT
CD
FM MODE AUXDISPLAY
SLEEP POWERDIMMER
REMOTE CONTROL RM-RXFS8000
<
FM MODE
DOWN
¢
4
AUTO PRESET
UP
>
SET
TUNER BAND
PRESET
TUNING
BASS
CONTROL
AUX
POWER
MD/TAPE
0 dB
VOLUME GAIN SELECTOR
TUNER
BAND
OPEN/CLOSE
TIMER/
SNOOZE
CLOCKUPMULTI CONTROLDOWN
U
L
T
R
A
C
O
M
P
A
C
T
C
O
M
P
O
N
E
N
T
S
Y
S
T
E
M
F
S
-
8
0
0
0
-6dB -12dB
CD
TUNER BAND
4
¢
PRESET TUNING
When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
You can listen to FM and AM stations. Stations can be tuned in
manually, automatically, or from preset memory storage.
■ Before listening to the radio:
• Check that both the FM and AM antennas are correctly con-
nected. (See page 3).
One Touch Radio —————————
Just press the TUNER BAND button to turn on the System and start
playing the station you were last tuned to.
■ You can switch from any other sound source to the radio by
pressing the TUNER BAND button.
■
1.Press the TUNER BAND button.
The Band and Frequency you were last tuned to appear on the
display.
(If the last station was selected using the preset number, the pre-
set number appears first.)
Each time you press the button, the band alternates between FM
and AM.
■
2. Select a station using one of the following
methods.
■ Manual Tuning
Press the
4 or ¢ button on the Unit or the Remote Control
repeatedly to move from frequency to frequency until you find
the station you want.
OR
■ Auto Tuning
If you press and hold the
4 or ¢ button on the Unit or the
Remote Control for one second or more, the frequency changes
down, or up, automatically until a station is found.
OR
■ Preset Tuning using the Remote Control (Possible
only after presetting stations)
Press the UP or DOWN button on the Remote Control to select
the desired preset number. After 1 second the display will show
the preset number’s band and frequency.
Example: Press the UP button until the preset number 12 “P--
12” appears.
■ Preset Tuning using the Unit (Possible only after pre-
setting stations)
Press the PRESET TUNING button to select the desired preset
number. Its band and frequency are displayed.
You can preset up to 30 FM stations and up to 15 AM stations using
the Remote Control.
Note: Preset numbers may have been set to factory test frequen-
cies prior to shipment. This is not a malfunction. You can
preset the stations you want into memory by following one
of the presetting methods below.
Manual Presetting —————————
■
1.Select a band by pressing the TUNER
BAND button.
■
2.Press the
4
or
¢
button to tune in a sta-
tion.
■
3. Press the SET button.
“P------” is displayed. The lower 2 digits blink.
■
4. Press the UP, DOWN, >, or < button to
select the preset number.
UP button: Increases the preset number by 1.
DOWN button:Decreases the preset number by 1.
> button: Increases the tenth digit for preset number.
< button: Decreases the tenth digit for preset number.
Tuning In a Station
Presetting Stations
(After 1 second)
When Changing the
Band