JVC HX-C6 Speaker System User Manual


 
20
Additional Information
Learning More about This System
Daily Operations—Playback
(see pages 8 to 12)
Listening to the Radio:
When you repeatedly press ¡
/1
, the frequency changes
step by step.
If you store a new station into an occupied preset number, the
previously stored station in that number will be erased.
When you unplug the AC power cord or if a power failure
occurs, the preset stations will be erased in a few days. If this
happens, preset the station again.
Playing Back a Disc:
The Non-DVD side of a “DualDisc” does not comply with the
“Compact Disc Digital Audio” standard. Therefore, the use of
Non-DVD side of a DualDisc on this product may not be
recommended.
This System cannot play “packet write” discs.
For MP3 playback...
MP3 discs require a longer readout time than regular CDs.
(It depends on the complexity of the group/file
configuration.)
Some MP3 files cannot be played back and will be skipped.
This result from their recording processes and conditions.
When making MP3 discs, use ISO 9660 Level 1 or level 2
for disc format.
This System can play back MP3 files with the extension
code <.mp3> (regardless of the letter case—upper or
lower).
It is recommended that you make each MP3 files at a
sampling rate of 44.1 kHz and at bit rate of less than 64
kbps.
This System manages files and folders as “tracks” and
“groups.”
This System can recognize up to 90 groups per disc (up to
750 tracks).
You can exchange discs while playing or selecting another
disc.
One Disc Play is also canceled when you change the source or
turn off the System.
If the MP3 file has ID3 Tags (Version 1.0 or 1.1), the track title
(“<TITLE>”) and performer name (“<ARTIST>”) will be
shown after the file name appears.
Your entry will be ignored if you have tried to enter a track
number that does not exist on the disc or in the group (for
example, selecting track 14 in the group that only has 12
tracks).
The memory of the track number for Resume Play will be
erased when you eject the disc or you change the disc to play.
If you unplug the AC power cord, Resume Play is back to on.
Daily Operations—Sound and Other Adjustments
(see pages 13 and 14)
Adjusting the Volume:
Be sure to turn down the volume before connecting or putting
the headphones.
When you turn off the System with the volume level set to
“VOL 16” or higher, the volume level is reset to “VOL 15”
next time you turn on the System.
Adjusting the Sound:
This function also affects the sound through the headphones.
The subwoofer lamp(s) indicates the current subwoofer
level—1 or 2. (If the level is “0,” the lamp(s) turns off.)
Selecting the Sound Modes:
The sound mode lamp lights when one of the sound mode is
activated.
Selecting the Surround Modes:
The Surround mode lamp lights when one of the Surround
mode is activated.
Setting the Clock:
“- -:- -” will flash on the display until you set the clock.
Advanced Disc Operations
(see pages 15 to 17)
Programming the Playing Order—Program Play:
While programming steps...
If you try to program a disc
number which the System has
not read, “NO READ” appears
on the display.
If you try to program a disc number on which no disc is
loaded, “NO DISC” appears on the display.
Your entry will be ignored if you have tried to program an
item number that does not exist on the disc (for example,
selecting track 14 on a disc that only has 12 tracks). Such
entries are ignored.
If you try to add a 33rd track, “FULL” appears on the display.
The program contents will be erased when...
You unplug the AC power cord.
You open the disc tray currently selected (regardless of the
play mode).
Playing at Random—Random Play:
Activating Random Play cancels Repeat Play or All Disc Play.
(One Disc Play is automatically selected.)
Activating Random Play for an MP3 disc changes the
ALBUM mode to the TRACK mode.
Random Play is also canceled when you eject the disc or
change the disc to play.
Repeating Playback—Repeat Play:
Repeat Play is also canceled when you change the source or
turn off the System.
Timer Operations
(see pages 18 and 19)
Turning Off the Power Automatically:
If you turn off the System, Sleep Timer is canceled.
Setting the Daily Timer:
When you unplug the AC power cord or if a power failure
occurs, the timer will be canceled. You need to set the clock
first, then the timer again.
HX-C6[J]-f.book Page 20 Monday, March 7, 2005 3:28 PM