JVC HX-C6 Speaker System User Manual


 
8
Daily Operations
—Playback
¥
Turn on the power.
The standby lamp on the main unit goes off.
Without pressing STANDBY/ON , the System also
turns on by pressing one of the source select button in step
ø
.
ø
Select the source.
Playback automatically starts if the selected source is ready
to start.
If you press AUX/USB, start playback source on the
external audio component or the PC.
π
Adjust the volume.
[
Operate the target source as explained
later.
To turn off (stand by) the System
In this manual, the operation using the remote control
is mainly explained; however, you can use the buttons
and controls on the main unit if they have the same (or
similar) name and marks.
2
1
3
SET
FM MODE/
MP3
DISC 1– 5
REPEAT
PROGRAM
7
4/1
¡/¢
1
3
2
3
10 keys
(1–10,+10)
The standby lamp on the unit lights in
red.
•A small amount of power is always
consumed even while on standby.
For private listening
Connect a pair of headphones to the PHONES jack on the main
unit. The sound will no longer come out of the speakers. Be sure
to turn down the volume before connecting or putting the
headphones.
Disconnecting the headphones will activate the speakers
again.
DO NOT turn off (stand by) the System with
the volume set to an extremely high level;
Otherwise, the sudden blast of sound can
damage your hearing, speakers and/or
headphones when you turn on the System or
start playback.
To cancel the demonstration
Press and hold until “DEMO OFF” appears on the display.
Main Unit
ONLY
DEMO OFF
DEMO START
HX-C6[J]-f.book Page 8 Monday, March 7, 2005 3:28 PM