45
REAR VIEW
6 Remote PAUSE Connector enables connection to
second recorder equipped with R.A. EDIT Connector,
or to JVC camcorder equipped with Master Edit
Control, for easy editing.
੬ pg. 32
7 RF OUT Connector enables connection to aerial
terminal of TV receiver.
੬ pg. 4
8 RF Output Channel Adjustment Screw enables
adjustment of output channel if UHF channel 36 is
used in your area.
੬ pg. 5
AV2 IN
RF OUT
PAUSE
RF OUT
ON–TEST–OFF
32
40
ANT. IN
AV1 IN/OUT
12
4
65
7
8
3
M
D
SP
LP
EP
D
I T R
W
REMAIN
9@0 # $
1
25
6347
8
!
1Mains Power Cord supplies power to recorder. ੬ pg. 4
2 AV1 IN/OUT SCART Connector enables AV connec-
tion to TV or second recorder; input recordable when
"AU 1" selected.
੬ pg. 4
3 AV2 IN Connector enables connection of satellite
receiver or second recorder; input recordable when
"AU 2" selected.
੬ pg. 6
4 ANT. IN Connector enables connection of aerial. ੬ pg. 4
5 RF OUT Switch enables operation via RF connection
or AV connection; activates test pattern when tuning
TV receiver for video preset.
੬ pg. 5
DISPLAY PANEL
7 PDC Indicator lights when PDC has been engaged
for timer recording. ੬ pg. 30
8 B.E.S.T. Picture System Display lights from bottom to
top while B.E.S.T. is active.
੬ pg. 20
9 "Cassette Loaded" Mark lights once a cassette is
inserted; remains lit until cassette ejected or power
turned off.
0 Instant Timer Recording Indicator lights when ITR
initiated; remains lit until ITR finishes.
੬ pg. 23
! Tape Speed Indicators display mode of recording; light
during Record or Play mode.
੬ pg. 19
@ "Timer" Indicator lights when TIMER has been
pressed to engage Timer mode.
੬ pg. 27
# Counter shows time elapsed since playback or
recording began.
REMAIN displays time remaining from current tape
position to end of tape.
Clock Display shows current time.
੬ pg. 9
* Counter, REMAIN and Clock Display appear
alternately when DISPLAY is pressed.
$ Channel Display shows station name being received
and its preset position.
Mode shows external input mode selected.
1 and 2 Symbolic Mode Indicators
* The indicator will blink during turbo search.
3 "DAILY" Program Mark lights when recorder has been
programmed to record daily serial.
੬ pg. 27
4 "WEEKLY" Program Mark lights when recorder has
been programmed to record weekly serial.
੬ pg. 27
5 Start Time/Stop Time Indicator separates Start Time
and Stop Time of timer recording on Display Panel.
੬ pg. 27
6 Tape Remaining Time Indicator displays time remaining
on tape when certain buttons are pressed.
੬ pg. 16
PLAY: REVERSE PLAY:
FF:
STILL:
FORWARD SLOW:
REW:
STILL:
REVERSE SLOW:
FF VARIABLE
RECORD:
SHUTTLE SEARCH:
REW VARIABLE
RECORD PAUSE:
SHUTTLE SEARCH:
*
*