Filter
Top Products
Page 7
Turning on the power of this unit
Press the POWER button to turn on this unit. The STANDBY
indicator is turned off and the display is turned on.
Press again to turn off the power and activate the standby mode. The
STANDBY indicator is lit.
The power is automatically turned on also by;
÷ Pressing the 0 OPEN/CLOSE button.
÷ Pressing the 3 PLAY/8 PAUSE button on the main unit or the 3
button on the remote control unit.
Notes
÷
A small amount of power (4 watts) is consumed even in the standby
mode.
÷
To turn off the power completely, disconnect the power cord from the
wall outlet.
Loading discs in the disc tray
Use the 0 OPEN/CLOSE button to open and close the disc tray.
1. Open the disc tray by pressing the 0 OPEN/CLOSE button.
2. Place discs on the disc tray according to the groove with their
label side up.
÷ To turn the disc tray and locates the disc tray to the just facing
you,Press DISC SKIP button.
3. Close the disc tray by pressing the 0 OPEN/CLOSE button.
CAUTION
When loading discs in the disc tray, be sure to put the discs
according to the groove. Otherwise, the discs will be dam-
aged when the disc tray is closed, and cannot be removed
from the unit.
BASIC OPERATIONS
Basic functions for disc
playback
POWER
Main unit
Remote control unit
POWER
Main unit
OPEN/CLOSE
0
Remote control unit
OPEN/
CLOSE
Main unit
6
PLAY/PAUSE
Remote control unit
3
Remote control operation
(for XL-FZ258BK)
Point the remote control unit towards the remote sensor and operate it
steadily and carefully. The remote control unit can be used within a
range of about 7 meters (23 feet) from the remote sensor, and at angles
of up to about 30 degrees.
Playing a disc
Press the 3 PLAY/8 PAUSE button on the main unit or the 3 button
on the remote control unit.
The 3 indicator lights on the display and playback starts.
To stop playback temporarily, press the 3 PLAY/8 PAUSE button on
the main unit or the 8 button on the remote control unit.
The 8 indicator lights on the display and playback stops temporarily.
To resume playback, press the 3 PLAY/8 PAUSE button on the main
unit or the 3 button on the remote control unit.
Adjusting the headphones level
Insert the headphones plug into the PHONES jack and turn the
PHONES LEVEL control to adjust the volume level.
Stopping playback
Press the 7 STOP/CANCEL button on the main unit or the 7 button
on the remote control unit.
Main unit
Remote control unit
STOP/CANCEL
7
7