Filter
Top Products
9
Common Operations
Turning On or Off the Power
To turn on the unit, press so that the standby
lamp goes off.
To turn off the unit (on standby), press
again so that the standby lamp lights up.
A little power is always consumed even while the unit is on
standby.
To save the power consumption while on
standby, press ECO.
All the indicators in the display window
including the display demonstration disappears.
To switch off the power supply completely, unplug the AC
power cord from the AC outlet.
When you unplug the AC power cord or if a power
failure occurs
The clock is reset to “– – : – –” soon, while the tuner preset stations
(see page 12) will be erased in a few days.
Setting the Clock
Before operating the unit any further, first set the clock built
in this unit. You can set the clock whether the unit is on or
off.
On the remote control ONLY:
1
Press CLOCK/TIMER.
“CLOCK” flashes on the display, then “AM 12:00”
appears.
The hour digit starts flashing.
2
Press ¢/¡ or 4/1
to adjust the hour, then
press SET.
The minute digits start flashing on the
display.
ECO
ECO
TIMER DAILY
(Daily Timer)
CLOCK
CD
FM/AM
USB/AUX
ECO
• If you want to correct the hour after pressing SET,
press CANCEL. The hour digits start flashing
again.
3
Press ¢/¡ or 4/1
to adjust the minute, then
press SET.
To check the clock time
Press DISPLAY while playing any
source.
•To return to the source indication,
press DISPLAY.
While the time indication appears on the display
If you press any button or turn any control, the time indication
returns to the source indication.
To adjust the clock again
If the clock has been previously adjusted, you need to press
CLOCK/TIMER repeatedly until “CLOCK” is selected.
• Each time you press the button, the clock/timer setting
modes change as follows:
If there is a power failure
The clock loses the setting and is reset to “– – : – –.” You need to set
the clock again.
Selecting the Sources
To listen to the radio, press FM/AM. (See page 12.)
To playback CDs, press CD 3. (See pages 13 – 19.)
To select the external equipment as a source, press USB/
AUX.
When you press the play button for a particular source
(CD 3, FM/AM, USB/AUX), the unit turns on (and the unit
starts playing the source if it is ready).
Canceled
MXC55[J]_09-10.p65 2/16/06, 2:46 PM9